5-in-1 Speed Square — User Guide

User guide for your Thorvald 5-in-1 Carpenter's Square and its 2-in-1 mechanical pencil.

🎥 Demo videos

🧰 The square's 5 functions

1. Three millimetre-precise rulers: measure and mark directly on each edge of the square.
2. Built-in marking gauge: the notches let you draw lines parallel to the edge of the workpiece.
3. Built-in protractor: measure and transfer angles from 0° to 90°.
4. Measuring template: diameters from 3 to 11 mm.
5. Reverse ruler + built-in guide: to measure and mark quickly, in any situation.

✏️ The 2-in-1 mechanical pencil

Long tip to mark at the bottom of deep holes, tough 2.8 mm lead and a sharpener built into the cap. Sharpen regularly for a fine line.

⚠️ Safety precautions

• Wearing protective equipment (gloves, safety glasses) is recommended during use.
• Keep the cardboard sheet and the batch number.
• Keep out of reach of children: contains small parts.

💡 Tip: Use the square on a flat surface and check the calibration before each marking for perfect angles.

📥 Downloads

← Back to product manuals